|
A demonstration executable has been produced in order to provide the possibility of trying out the data handling software in reality. The binary file may be loaded onto an ERC32 simulator demonstrating the execution of a set of predefined telecommands resulting in generation of a sequence of telemetry source packets.
Scenario
Action
|
Service Type
|
Insert two telecommands in sub-schedule 1.
|
|
|
|
|
Enable release from command schedule
|
|
Enable release from sub-schedule 1
|
|
The two telecommands will thus be released in due time.
All telecommands request acknowledgment for all stages of execution, resulting in a range of verification reports as defined by Telecommand Verification Service.
The above telecommand sequence will be executed over and over again until execution is stopped.
Execution Setup
The setup varies depending on the type of ERC32 simulator being used. Please select amongst the following alternatives to get specific information on how to execute the demonstration:
Implementation
A stub has been introduced in the Ground IF component simulating reception of telecommand source packets based on an interrupt.
Telecommands are hard-coded as raw bytes in the Ada package TC_Batch (see specification and body).
Injection of telecommands into the system is triggered by an interrupt that may be generated manually on the ERC32 simulator, or will be generated with a period of 2.5 seconds by the Generator package (see specification and body).
|